tftp-сервер нам жизненно необходим только при обновлении прошивки. Для конфигурирования телефонов tftp — удобная, но не обязательная вещь.
Т.е. можно единожды настроить телефон вручную или через tftp и убрать tftp (или убрать cnf-файлы с tftp, или закрыть доступ к tftp), и перенести телефон в сеть к пользователю, где tftp не будет.
Когда телефон включается, он сначала идет на tftp-сервер за конфигурационными файлами (если они есть), а если не находит, то загружает параметры, сохраненные локально в его флеш-памяти.
С tftp телефон загружает следующие файлы:
сначала:
SIPDefault.cnf — дефолтный конфигурационный файл
затем:
SIPXXXXYYYYZZZZ.cnf — phone-specific конфигурационный файл — для конкретного телефона с MAC-адресом SIPXXXXYYYYZZZZ. MAC-адрес записывается в верхнем регистре, расширение .cnf — в нижнем.
Параметры, указанные в SIPXXXXYYYYZZZZ.cnf, перезаписывают параметры, указанные в SIPDefault.xml. В SIPXXXXYYYYZZZZ.cnf можно указывать не только логин/екстеншен/пароль для подключения, а любые значения, которые присутствуют в SIPDefault.cnf.
Правила записи переменных
Переменные в конфигурационных файлах имеют следующий формат:
variable-name : value ; optional comments
- одна переменная — одно значение;
- разделяем переменные и значения двоеточием;
- на одну строку одна пара переменная:значение, пару не разрываем (не переносим «значение» в следующую строку);
- можно ставить пробелы перед/после переменных и значений. Если нужен пробел в значении, заключаем значение в кавычки одинарные или двойные. Открывающие и закрывающие кавычки должны быть одинаковыми — либо одинарными, либо двойными;
- для комментариев используются ; или #
- строки могут быть пустыми, или с комментариями;
- названия переменных — регистроНЕзависимые.
Примеры файлов конфигурации для настройки SIP-протокола на телефонах Cisco 7940 (взяты с сайта cisco):
SIPDefault.cnf — файл с общими параметрами SIP, применяемый ко всем телефонам (скачать)
SIPXXXXYYYYZZZZ.cnf — файл в настройками конкретного телефона (скачать)
SIPDefault.cnf
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 |
# SIP Default Configuration File # Image Version image_version: P0S3-8-12-00 # Proxy Server proxy1_address: 172.16.255.255 proxy2_address: ""; Can be dotted IP or FQDN proxy3_address: ""; Can be dotted IP or FQDN proxy4_address: ""; Can be dotted IP or FQDN proxy5_address: ""; Can be dotted IP or FQDN proxy6_address: ""; Can be dotted IP or FQDN # Proxy Server Port (default - 5060) proxy1_port: 5060 proxy2_port: 5060 proxy3_port: 5060 proxy4_port: 5060 proxy5_port: 5060 proxy6_port: 5060 # Proxy Registration (0-disable (default), 1-enable) proxy_register: 0 # Phone Registration Expiration [1-3932100 sec] (Default - 3600) timer_register_expires: 3600 # Codec for media stream (g711ulaw (default), g711alaw, g729a) preferred_codec: g711ulaw # TOS bits in media stream [0-5] (Default - 5) tos_media: 5 # Out of band DTMF Settings #(none-disable, avt-avt enable (default), avt_always-always avt) dtmf_outofband: avt # DTMF dB Level Settings #(1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up) dtmf_db_level: 3 # SIP Timers timer_t1: 500; Default 500 msec timer_t2: 4000; Default 4 sec sip_retx: 10; Default 10 sip_invite_retx: 6; Default 6 timer_invite_expires: 180 ; Default 180 sec ####### New Parameters added in Release 2.0 ####### # Dialplan template (.xml format file relative to the TFTP root directory) dial_template: dialplan # TFTP Phone Specific Configuration File Directory tftp_cfg_dir: ""; Example: ./sip_phone/ # Time Server #(There are multiple values and configurations refer to Admin Guide for Specifics) sntp_server: ""; SNTP Server IP Address sntp_mode: anycast (default); unicast, multicast, or directedbroadcast time_zone: EST; Time Zone Phone is in dst_offset: 1; Offset from Phone's time when DST is in effect dst_start_month: April; Month in which DST starts dst_start_day: ""; Day of month in which DST starts dst_start_day_of_week: Sun; Day of week in which DST starts dst_start_week_of_month: 1; Week of month in which DST starts dst_start_time: 02; Time of day in which DST starts dst_stop_month: Oct; Month in which DST stops dst_stop_day: ""; Day of month in which DST stops dst_stop_day_of_week: Sunday; Day of week in which DST stops dst_stop_week_of_month: 8; Week of month in which DST stops 8=last week of month dst_stop_time: 2; Time of day in which DST stops dst_auto_adjust: 1; Enable(1-Default)/Disable(0) DST automatic adjustment time_format_24hr: 1; Enable(1 - 24Hr Default)/Disable(0 - 12Hr) # Do Not Disturb Control #(0-off (default), 1-on, 2-off with no user control, 3-on with no user control) dnd_control: 0; # Caller ID Blocking #(0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control) callerid_blocking: 0; (Default is 0 - disabled and sending all calls as anonymous) # Anonymous Call Blocking #(0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control) anonymous_call_block: 0; (Default is 0 - disabled and blocking of anonymous calls) # DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127) dtmf_avt_payload: 101; Default 101 # Sync value of the phone used for remote reset sync: 1; Default 1 ####### New Parameters added in Release 2.1 ####### # Backup Proxy Support proxy_backup: ""; Dotted IP of Backup Proxy proxy_backup_port: 5060; Backup Proxy port (default is 5060) # Emergency Proxy Support proxy_emergency: ""; Dotted IP of Emergency Proxy proxy_emergency_port: 5060; Emergency Proxy port (default is 5060) # Configurable VAD option enable_vad: 0; VAD setting 0-disable (Default), 1-enable ####### New Parameters added in Release 2.2 ###### # NAT/Firewall Traversal nat_enable: 0; 0-Disabled (default), 1-Enabled nat_address: ""; WAN IP address of NAT box (dotted IP or DNS A record only) voip_control_port: 5060; UDP port used for SIP messages (default - 5060) start_media_port: 16384; Start RTP range for media (default - 16384) end_media_port: 32766; End RTP range for media (default - 32766) nat_received_processing: 0; 0-Disabled (default), 1-Enabled # Outbound Proxy Support outbound_proxy: ""; restricted to dotted IP or DNS A record only outbound_proxy_port: 5060; default is 5060 ####### New Parameter added in Release 3.0 ####### # Allow for the bridge on a 3way call to join remaining parties upon hangup cnf_join_enable: 1; 0-Disabled, 1-Enabled (default) ####### New Parameters added in Release 3.1 ####### # Allow Transfer to be completed while target phone is still ringing semi_attended_transfer: 1; 0-Disabled, 1-Enabled (default) # Telnet Level (enable or disable the ability to Telnet into the phone) telnet_level: 1; 0-Disabled (default), 1-Enabled, 2-Privileged ####### New Parameters added in Release 4.0 ####### # XML URLs services_url: ""; URL for external Phone Services directory_url: ""; URL for external Directory location logo_url: ""; URL for branding logo to be used on phone display # HTTP Proxy Support http_proxy_addr: ""; Address of HTTP Proxy server http_proxy_port: 80; Port of HTTP Proxy Server (80-default) # Dynamic DNS/TFTP Support dyn_dns_addr_1: ""; restricted to dotted IP dyn_dns_addr_2: ""; restricted to dotted IP dyn_tftp_addr: ""; restricted to dotted IP # Remote Party ID remote_party_id: 0; 0-Disabled (default), 1-Enabled |
SIPXXXXYYYYZZZZ.cnf
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 |
# SIP Configuration Generic File # Line 1 appearance line1_name: 1234567 # Line 1 Registration Authentication line1_authname: "UNPROVISIONED" # Line 1 Registration Password line1_password: "UNPROVISIONED" # Line 2 appearance line2_name: football # Line 2 Registration Authentication line2_authname: "UNPROVISIONED" # Line 2 Registration Password line2_password: "UNPROVISIONED" ####### New Parameters added in Release 2.0 ####### # Phone Label (Text desired to be displayed in upper right corner) phone_label: ""; Has no effect on SIP messaging # Line 1 Display Name (Display name to use for SIP messaging) line1_displayname: "User ID" # Line 2 Display Name (Display name to use for SIP messaging) line2_displayname: "" ####### New Parameters added in Release 3.0 ###### # Phone Prompt (The prompt that will be displayed on console and Telnet) phone_prompt: "SIP Phone"; Limited to 15 characters (Default - SIP Phone) # Phone Password (Password to be used for console or Telnet login) phone_password: "cisco"; Limited to 31 characters (Default - cisco) # User classification used when Registering [ none (default), phone, ip ] user_info: none |